2532
       +----o----+
   A7  | 1     24| Vcc
   A6  | 2     23| A8
   A5  | 3     22| A9
   A4  | 4     21| Vpp     (A11 on 2732A)
   A3  | 5     20| PD/PGM  (G*Vpp on 2732A)
   A2  | 6     19| A10
   A1  | 7     18| A11     (E* on 2732A)
   A0  | 8     17| Q8
   Q1  | 9     16| Q7
   Q2  |10     15| Q6
   Q3  |11     14| Q5
   Vss |12     13| Q4
       +---------+

To program the 2532, the PGM input is pulsed low for each address to be
programmed.  This is equivalent to the /E on the 2732A which is pulsed low
during programming.  So, to program a 2532 on a 2732A programmer,
cross the following pins:

     2532 pin     to    2732A pin
	18                21             (A11)
	20                18             (pgm pulse low pin, low for read)
	21                20             (Vpp prog voltage input)